Creality K2 Plus Combo

The K2 Plus Combo from Creality combines ground-breaking technology with intuitive ease of use and the fascinating multi-colour printing that takes your projects to the next level.

► Creality K2 Plus

Sturdy aluminium alloy frame

The sturdy unibody frame of the K2 Plus is custom-made from die-cast aluminium alloy and CNC-milled. Maximum precision and stable printing behaviour are guaranteed even at high speeds.

Large build volume

With a build volume of 350 x 350 x 350 mm, the K2 Plus is suitable for printing large-format objects or several smaller objects at the same time. Your models are produced in record time with breathtaking attention to detail.

Speed meets precision

Like its predecessors K1 and K1 Max, the K2 Plus is characterised by its enormous printing speed and precision. The 3D printer achieves print speeds of up to ≤ 600 mm/s with an acceleration of ≤ 30000 mm/s².

Tip: The average noise level at standard speeds is less than 50 dB.

FOC closed loop motors

Both the extruder and all XYZ axes of the K2 Plus are driven by closed-loop servo motors. With 32768 microsteps per revolution, the motors achieve high torque and outstanding responsiveness. FOC control with variable voltages reduces heat build-up and prevents blockages caused by overheating.

Apus all-metal extruder with tri-metal heat protection nozzle

The K2 Plus uses a Direct Drive Apus all-metal extruder with a tri-metal heat protection nozzle for precise and smooth extrusion. The nozzle is designed for printing temperatures of up to max. 350 °C and also enables the processing of high-performance materials.

Automatic anti-tilt levelling

Two optical distance sensors for automatic tilt adjustment of the build plate on the Z-axis and a strain gauge in the print head ensure precise levelling.

Further features:

• 800-watt AC high-power heating system with overheating protection and automatic switch-off in the event of unexpected errors,
• Nozzle camera for print calibration and chamber camera for print monitoring and detection of print errors,
• 4.3 inch colour touchscreen.

► Creality CFS

The K2 Plus Combo is equipped with the intelligent CFS (Colour Filament System) filament management system. The multi-material system has 4 spool slots that support multi-colour printing and the simultaneous use of different materials. If the device is combined with other colour filament systems, a total of 16 colours can be printed with a wide range of colour combinations.

The system automatically loads and unloads the filaments, eliminating the need for tedious manual filament changes. In addition, the well-sealed multicolour device with smart temperature and humidity indicators can be used as a filament drying box for storing the filaments.

Automatic RFID recognition of the materials is supported.

Tip: The CFS can hold four 1 kg spools with a diameter of 197-202 mm and a width of 42-68 mm. Creality filaments with cardboard spools are compatible with the CFS. Filaments such as PLA, PETG, ABS, ASA or PA-CF can be easily processed in the CFS; flexible materials such as TPU or wet filaments such as PVA/BVOH are not supported.

Included in delivery:

• 1 x K2 Plus
• 1 x CFS
• 4 x Hyper PLA with RFID chip (Black, White, Red, Blue), 500 g each
• 1 x Tool Kit (incl: Glue stick, grease, flush cutter, scraper, L spanner set, 8 x screwdriver bits, 2 x socket screwdriver bits, handle, nozzle wiper)
• USB drive, 16 GB
• 1 x filament swatch for Creality filaments
• 1 x 0.4 mm nozzle for K2 Plus
• 1 x cutter + cutter rod
• 1 x filament sensor circuit board

►Note: Please note that the CFS system is packed directly integrated in the printer - all in one box for extra convenience and quick start!

Unboxing Guide

Technical specifications: