Fiberlogy rNylon Anthracite, 1,75 mm / 1000 g
Recycled PA12 nylon filament in Anthracite
€ 53,49
(€ 53,49 / kg, Price shown includes 23% VAT.
- Carefully selected raw materials
- 100% recycled
- Abrasion-resistant and heat-resistant
Related products
Product information & technical details
- Item no.: FL-3S-rPA-ANTHRACITE-100-175
- Content: 1.000 g
- EAN: 5902560991925
- Manufacturer No.: 3S-rPA-ANTHRACITE-100-175
- Manufacturer: Fiberlogy
- Diameter: 1,75 mm
- Product type: PA - Nylon Filaments
- Color: Black
- System: Spool
- Recommended processing temperature: 255 - 270 °C
- Recommended heating temperature: 100 ° C
- Polyamide: PA12
Description
Fiberlogy rNylon is a PA12 filament with high flexibility, abrasion resistance and good resistance to heat and chemicals. Printed parts flex under load without breaking easily and withstand friction well. Typical applications include gears, guides, plain bearings and nuts, i.e., parts that rotate, slide or are subjected to repeated loads.
Please note: rNylon requires an enclosed build chamber and a part cooling fan speed of just 0 to 10%. Glass with PVA glue or hairspray is a suitable printing surface. As nylon absorbs moisture from the air, the filament should be dried at 70 °C for 4 hours before printing.
Filament Spool Dimensions
Downloads
Legal guarantee & manufacturer details
More information: https://europa.eu/youreurope/guarantees
Similar products
Questions & Answers about Fiberlogy rNylon Anthracite
Customer Reviews
2 English reviews written for Fiberlogy rNylon Anthracite
5 customer reviews in all languages
| 5 stars | | 6 | (60%) |
|---|---|---|---|
| 4 stars | | 2 | (20%) |
| 3 stars | | 0 | (0%) |
| 2 stars | | 1 | (10%) |
| 1 Stars | | 1 | (10%) |
10 reviews
2 customer reviews in English
5 customer reviews in all languages
-
Justin
07 March 2023
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Was this rating helpful? (2) (0)
-
JS
27 November 2021
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Rated with 5 out of 5 stars.
Nice recycled nylon filament
It's nylon, expect a challenge. Stick glue on a smooth surface with 5mm brim seems to work. Not suitable for fine details due to high printing temp, i.e. benchy's chimney prints blobby but it's to be expected
Was this rating helpful? (1) (0)
Magazine Articles:
-
Ireland: Free standard delivery from € 87,90
-
Free
returns More than 11.350 products
We deliver worldwide to
more than 40 countries
Rated with 2 out of 5 stars.
Impressive Filament when it works
This filament is just like its non-recycled counterpart and can make some mechanically demanding parts that take a serious beating. I've used around 4 full spools of this R Anthracite PA12 specifically and have loved it up until now. With that said, the last two spools of this material I received were unlike the previous 4. They had a matte to semi-matte finish to them and one of them was an off gray rather than a black color. They also had absolutely no layer adhesion despite repeated drying and testing against other non-recycled spools of the same filament. This is speculation, but based on my recent experience I would suspect the current lack of availability of this filament is related to a consistency issue. Unfortunate as it is, I was unable to submit a return because it was ~6 months before I finished off my previous spools and tried to print with it. It seems if you're going to buy recycled filament of this nature it pays to go out of your way to unseal and test it.