Magigoo 3D Glue Stick for HT, 50 ml

WHAT

MAGIGOO HT was developed for professional use at high printing temperatures. The part should be relatively easy to remove after cooling and the residue should also be easy to remove.

WHY

High temperature materials such as PEEK are advanced thermoplastics that offer improved mechanical and chemical stability at elevated temperatures compared to conventional thermoplastics. Other materials include PEKK, Ultem and PPSU as well as their carbon/glass fibre reinforced counterparts. Due to their high pressure temperature and exceptional properties, these materials are in high demand in high temperature and high performance engineering applications such as in the automotive and aerospace industries. In addition, these materials are also in demand in the chemical, petrochemical, medical and research sectors.
High temperature filaments prove to be challenging materials for FDM printing due to their higher tendency to warp. These materials are generally printed at elevated temperatures due to their high-temperature properties. MAGIGOO HT is a specialised solution for FDM printing of PEEK filaments developed for processing at elevated printing temperatures.

HOW

MAGIGOO HT has been developed and tested to work with a print bed temperature of 150 °C or less.

• Shake the bottle.
• Apply to the desired area by pressing the spring on the bed (activate the inner valve).
• Print according to the filament / printer manufacturer's recommendations
• Allow to cool and remove. The print should be visible immediately
• Cleaning - Use a damp cloth to wipe clean.

Additional information:

Using this product with filaments other than PEEK may cause over-adhesion and damage your surface. Follow the instructions in the technical data sheet to achieve the best results.

For larger prints, a 20 mm margin is recommended. Magigoo HT is designed for glass surfaces but will also work on high temperature garolite and other surfaces.

Magigoo HT instructions