Magigoo Gilde Original, 250 ml

Magigoo Glide Original is a print bed adhesive that has been specially developed for large-area print beds and high print volumes. The formulation of the adhesive is designed to reduce warping, increase process stability and ensure reproducible adhesion over the entire print area.

Glide Original is suitable for common filaments such as PLA, ABS and PET-G as well as numerous engineering thermoplastics. After application, printing can be started without any waiting time. During the printing process, the adhesive ensures stable adhesion, but after cooling, the components can be removed from the print bed in a controlled and gentle manner. Cleaning is easy with a damp cloth, without any aggressive solvents, and makes reapplication quick and efficient.

Key features:

• for FDM printers,
• 250 ml high-capacity container for frequent printing cycles, series production and large-format printers,
• reliable first layer,
• high compatibility with standard materials and engineering plastics,
• homogeneous adhesive distribution and uniform adhesion over the entire build plate,
• ready for immediate use, even without flash-off or drying,
• easy to clean with water.

► Recommendation for use:

Shake the bottle for 3-5 seconds before use to mix thoroughly. Then twist the transparent cap to open the dispensing tip. Apply a few drops or a thin line of adhesive to the clean build plate. Spread the adhesive quickly, evenly and in a very thin layer over the entire print area. You can start printing straight away as no drying time is required.

Once printing is complete and the print bed has cooled down completely, the printed component can be removed from the surface in a controlled and easy manner. For consistent results, we recommend cleaning the build plate with a damp cloth after each printing session and reapplying the adhesive.