Polymaker PolyMide PA6-CF Black
Carbon fibre reinforced nylon in black
Sold outOur shop no longer sells this product.
Similar products
-
Polymaker Fiberon™ PA6-GF25 Grey, 1,75 mm / 500 g
- Glass fibre reinforcement
- Excellent heat resistance
- Excellent layer adhesion
-
Polymaker Nylon CoPA 6/6-6 Black, 1.75 mm (750 g)
- High heat resistance
- Robust material
- High tensile strength
-
FormFutura STYX PA6-CF15 Black, 1,75 mm / 500 g
- With 15% carbon fibre
- High rigidity & strength
- Temperature resistant up to 180 °C
-
FormFutura STYX PA6-GF30 Black, 1,75 mm / 500 g
- With 30% glass fibres
- High rigidity & compressive strength
- Temperature resistant up to 180 °C
-
FormFutura STYX PA6 Traffic Black, 1,75 mm / 500 g
- Low warping & excellent layer adhesion
- High impact strength & good mechanical properties
- High chemical resistance
-
Fiberlogy Nylon PA12 + GF15 Black, 1.75mm / 500g
- High impact resistance
- Chemical resistance
- Low shrinkage
-
Spectrum Nylon PA6 Low Warp CF15S Black, 1.75mm / 500g
- Thermally stabilised composite
- With 15% carbon fibres
- High stiffness & tensile strength
-
Spectrum Nylon PA6 Low Warp GF30 Black, 1.75mm / 500g
- Outstanding mechanical properties
- Outstanding chemical resistance
- 180 °C HDT heat resistance
-
Spectrum Nylon PA6 Natural - Low Warp, 1.75 mm / 500 g
- Very low shrinkage (0.3%)
- High-temperature resistance
- Simple separation of the object from the printing table
-
Snapmaker Nylon - Black, 1.75 mm / 1000 g
- Very good mechanical properties
- High abrasion resistance & heat resistance
- Ideal for technical applications
-
-
Bambu Lab PA6-GF Black, Spool (1.000 g)
- Excellent strength & durability
- High dimensional stability & heat resistance
- Very good chemical resistance
-
Fillamentum 0rCA Black, 1,75 mm / 600 g
- Made from recycled nylon PA6
- With 10% recycled carbon fibres
- High strength & rigidity
Product information & technical details
- Manufacturer: Polymaker
- Diameter: 1,75 mm, 2,85 mm
- Product type: Carbon Filament, PA - Nylon Filaments
- Color: Black
- System: Spool
- Recommended processing temperature: 280 - 300 °C
- Recommended heating temperature: 25 - 50 °C
- Polyamide: PA6
Description
PolyMide ™ PA6-CF is a carbon fibre reinforced PA6 filament (nylon 6). The material has excellent thermal and mechanical properties without affecting the layer adhesion.
| Heat distortion resistance (ASTM D648 - ISO 75) | ||
| 1.80 Mpa HDT-A | 0.45 Mpa HDT-B | |
| PolyMide PA6-CF | 196 ° C | 215 ° C |
| PolyMide PA6-GF | 124 ° C | 191 ° C |
| Standard PA6 | 80 ° C | 96 ° C |
| PolyMide CoPA | 71 ° C | 91 ° C |
Recommended print settings:
- Nozzle temperature: 280 - 300 ° C
- Heating bed temperature: 25 - 50 ° C (do not exceed 50 ° C)
- Installation space temperature: 25 - 50 ° C (do not exceed 50 ° C)
- Printing speed: 60 mm / s
- Fan: OFF
The print settings are based on a printer with a 0.4 mm nozzle and are reference values only.
Print bed
PolyMide ™ PA6-CF can be printed on almost any surface with a thin layer of PVA adhesive or Magigoo PA. We recommend a flexplate to facilitate removal of the model from the plate.
Nozzle
PolyMide ™ PA6-CF contains 20% chopped carbon fibres, which makes it very abrasive. It is important to use an abrasion resistant nozzle.
PolyMide ™ PA6-CF can easily damage a brass nozzle after a few hundred grams of printing. Hardened nozzles are more expensive than conventional brass nozzles. Therefore, it is important to consider the amount of materials to use.
Hot-End
Polymaker recommends a full-metal hot-end that maintains a stable temperature of at least 280 ° C.
Annealing the components
Polymaker recommends that all models made with PolyMide ™ PA6-CF be post-cured. This allows the user to utilize the full mechanical and thermal properties of this material. During annealing, the model is placed in an oven at 90 ° C for 2 hours.
For more tips and information, please read the "Product Information Sheet".
Filament Spool Dimensions
Accessories
Polymaker PolyBox Edition II - Filament Storage Box
- Optimal storage
- Humidity control
- For many filament types
Customer Reviews
1 English review written for Polymaker PolyMide PA6-CF Black
2 customer reviews in all languages
| 5 stars | | 6 | (85%) |
|---|---|---|---|
| 4 stars | | 1 | (14%) |
| 3 stars | | 0 | (0%) |
| 2 stars | | 0 | (0%) |
| 1 Stars | | 0 | (0%) |
7 reviews
1 customer review in English
2 customer reviews in all languages
-
TC
13 January 2021
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating.
Magazine Articles:
Discover 3DJake:
-
Ireland: Free standard delivery from € 87,90
-
Free
returns More than 11.100 products
We deliver worldwide to
more than 40 countries
really excellent
Rated with 5 out of 5 stars.
I use this in a Raise3d E2 printer, Im really happy with the outcome of my prints, they are final end user prints. This is a great product
Was this rating helpful? (2) (0)