presto Aluminium Putty, 250 g

Name: presto Aluminium Putty, 250 g
Brand: presto
SKU: MD-600351
Price: 7.19 EUR
Availability: InStock

2K aluminium fine-fill putty for cars, mechanical engineering and model-making, in light grey

€ 7,19

(Price shown includes 23% VAT. - Excludes delivery costs )

Variant:

Features & Advantages

2-component polyester filler
Highly thixotropic & suitable for large areas
Aluminium-pigmented
Easy to sand

Product information & technical details

Item no.: MD-600351
Content: 1 pc
EAN: 4052800600351
Manufacturer No.: 600351
Manufacturer: presto
Product type: Filler compounds

Description

presto Aluminium Putty is a two-component polyester metal filler with aluminium pigments, suitable for vehicle repairs, mechanical engineering and hobby use. It fills holes, levels uneven areas and reinforces thin sections on a wide range of surfaces, from metal and wood to plastic and concrete.

Composition: medium-flexible polyester resin with aluminium filler

The formula is based on a medium-flexible, highly reactive, amine-pre-accelerated polyester resin combined with fillers and aluminium pigments. The styrene-free formulation helps reduce the typical odour of conventional polyester fillers and allows for lower-emission application.

Its highly thixotropic consistency makes the filler especially easy to spread over larger areas and apply without pores. This makes working on larger surfaces much easier and reduces the need for reworking caused by air pockets or uneven layer thicknesses.

Resistant to water, road salt & mild chemicals

Once cured, the material is resistant to weak acids, weak alkalis, propellants, solvents, water and road salt. These properties also make it suitable for components that will later be exposed to weathering.

Application: fast-curing and easy to finish

After mixing with the correct amount of hardener, the surface can usually be drilled, sanded, sawn, filed and painted after around 30 to 40 minutes. Sandpaper in different grits is suitable for both preparation and finishing work.

Note: The surface should be rust-free, clean, dry, free from grease and sanded before application. Follow the manufacturer’s safety instructions regarding hardener addition, skin contact and ventilation during mixing and application.

Technical specifications:

Base	polyester
Colour	light grey
Consistency	easy to spread
Fully cured after	30 min
Ready to be worked on after	30 min
Can be sanded / painted over after	30 min
Suitable for materials	metal, various plastics, wood, concrete
Min. application temperature	12 °C
Max. application temperature	30 °C
Flash point	31
Pot life	5–6 min
Hardener ratio	2–4%

Hazard and precautionary statements

Signal word: Warning

Precautionary statements:

P101 - If medical advice is needed, have product container or label at hand.
P102 - Keep out of reach of children.
P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P271 - Use only outdoors or in a well-ventilated area.
P280 - Wear protective gloves/protective clothing/eye protection/face protection.
P314 - Get medical advice/attention if you feel unwell.
P302+P352 - IF ON SKIN: Wash with plenty of water/soap
P403+P235 - Store in a well-ventilated place. Keep cool.
P501 - Dispose of contents/container according to local/national regulations.

Hazard statements:

H226 - Flammable liquid and vapour
H315 - Causes skin irritation
H317 - May cause an allergic skin reaction
H319 - Causes serious eye irritation
H361d - Suspected of damaging the unborn child.
May cause damage to the statoacoustic organ through prolonged or repeated exposure.
H412 - Harmful to aquatic life with long lasting effects