Plastic Primer, 400 ml

Transparent plastic primer spray for durable paint finishes on hard plastics

€ 17,49

(Price shown includes 23% VAT. - Excludes delivery costs )

Features & Advantages

For 7 types of plastic
Dry after 15 mins
Coverage: 5–6 m²

Product information & technical details

Item no.: MD-308066
Content: 1 pc
EAN: 4052800308066
Manufacturer No.: 308066

Description

presto Plastic Primer is a transparent spray primer that helps spray paints adhere reliably to hard plastics. It creates a strong connection between the plastic surface and the top coat, reducing the risk of the paint chipping, peeling or flaking over time.

The primer is suitable for use on polyurethane (PUR), polystyrene (PS), polyamide (PA), modified polypropylene rubber (EPDM), acrylonitrile butadiene styrene plastic (ABS), glass fibre-reinforced plastic (GRP) and rigid PVC. This covers most common plastic parts used in the automotive and leisure sectors.

Preparation: Before application, it is recommended to lightly sand the plastic surface with fine wet sandpaper and clean it thoroughly with a silicone remover. This preparation further improves primer adhesion and helps achieve an even result.

Fast-drying and economical: A 400 ml can covers approximately 5 to 6 m². The primer is touch-dry after around 5 minutes and dry and ready to paint over after around 15 minutes, so the next painting step can continue without a long waiting time.

Technical specifications:

Base	special paint
Colour	transparent
Consistency	solvent-based
Coverage	400 ml – 5–6 m²
Can be painted over after	15 min
Fully dry after	15 min
Min. application temperature	10 °C
Max. application temperature	30 °C

Hazard and precautionary statements

Signal word: Danger

Precautionary statements:

P101 - If medical advice is needed, have product container or label at hand.
P102 - Keep out of reach of children.
P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 - Do not spray on an open flame or other ignition source.
P251 - Do not pierce or burn, even after use.
P260 - Do not breathe dust/fume/gas/mist/vapours/spray.
P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
P501 - Dispose of contents/container according to local/national regulations.