3DLac Spray Adhesive, 400 ml
For perfect adhesion to the printing bed
€ 8,79
(€ 21,98 / l, Price shown includes 23% VAT.
Features & Advantages
- Suitable for all materials
- Without perfume
- Resistant to elevated temperatures
- Strong fixing agent
Frequently bought together with 3DJAKE Isopropyl Alcohol, 1 l
Description
3DLac is a spray adhesive glue for 3D printer build plates. The spray was developed by a Spanish laboratory specifically for FDM processing.
3DLac is without perfume. It is resistant to elevated temperatures and includes a strong fixing agent for improved adhesion to the build plate
Hazard and precautionary statements
Signal word: Danger
Precautionary statements:
- P101 - If medical advice is needed, have product container or label at hand.
- P102 - Keep out of reach of children.
- P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 - Do not spray on an open flame or other ignition source.
- P251 - Do not pierce or burn, even after use.
- P264 - Wash thoroughly with plenty of water after use.
- P280 - Wear protective gloves/protective clothing/eye protection/face protection.
- P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
- P501 - Dispose of contents/container according to local/national regulations.
Hazard statements:
- H222 - Extremely flammable aerosol
- H229 - Pressurized container: may burst if heated
- H319 - Causes serious eye irritation
- H336 - May cause drowsiness or dizziness
Related products
Similar products
Questions & Answers about 3DLac Spray Adhesive
Customer Reviews
13 English reviews written for 3DLac Spray Adhesive
238 customer reviews in all languages
| 5 stars | | 455 | (91%) |
|---|---|---|---|
| 4 stars | | 31 | (6%) |
| 3 stars | | 4 | (0%) |
| 2 stars | | 2 | (0%) |
| 1 Stars | | 4 | (0%) |
496 reviews
13 customer reviews in English
238 customer reviews in all languages
-
Marcel
14 August 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Was this rating helpful? (7) (0)
-
Farnaby
22 May 2025
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Rated with 1 out of 5 stars.
Destroyed my sheet
Got a Prusa satin sheet with small pla prints stuck and had to get customer service to help me, soaking in warm water with soap didn't work. I had to freeze it and still destroyed several plastic spatulas to remove the prints.
Second I tried ABS on a Prusa steel sheet. It stuck so hard that even after the freezer it ripped the coating off the sheet.
Will throw away and never recommend to anyone.
Dimafix works way better.Was this rating helpful? (0) (0)
-
Oleg
11 February 2023
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Rated with 5 out of 5 stars.
Serious adhesion
Strong enough to take off chunks of smooth (!!!) glass along with the print.
Just wash it off before printing materials that stick well enough by themselves.
Doesn't leave an imprint on the bottom surface of the printed part.Was this rating helpful? (2) (0)
-
Customer
05 February 2026
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Rated with 5 out of 5 stars.
indispensable
great and strong
Was this rating helpful? (0) (0)
-
Customer
26 October 2025
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Rated with 5 out of 5 stars.
Best
Simply the best - works always
Was this rating helpful? (0) (0)
Magazine Articles:
Discover 3DJake:
-
Ireland: Free standard delivery from € 87,90
-
Free
returns More than 10.550 products
We deliver worldwide to
more than 40 countries
Rated with 5 out of 5 stars.
Works excellent with ASA directly 6mm aluminum Modix Big60 V2 print bed
I've been struggling and searching A LOT for a good combination to print ASA successfully in my Modix Big60 V2 printer (with full enclosure).
In the end, to my stupid surprise, just spraying 3DLac on the aluminum and heating up the bed to 80ºC gives the strong sticking effect I needed!
And the hotter you go, the harder it sticks.
I've noticed that from 70ºC it gave a really good on a BuildTak Flex System, but my objects kept bending the spring steel sheet from the magnets :-(
With wide objects (that need a nice long time per layer) you should really keep the fan off (otherwise lots of internal stress and warping).
But the narrower you go (less time per layer), the more fan speed works ok (even up to 90%), which I need to use to make details and overhangs in fast layers come out good.
And the best of all; after cooling down (from approx 45ºC) it just lets go completely (from the shrinkage of the aluminum bed)?!
I found that it works the easiest even without a brim, as the brim kept sticking to the aluminum, even after cooling down. This is because it can easily deform aluminum bed shrinks, while a more solid object will shrink differently than the bed and come loose.
I'm really very satisfied! I just need to make a simple carton box/frame to limit where the spray will reach, so I won't get spray the inside of my machine too much.
Haven't tried yet, but I expect more materials will stick equally good.
Time will tell.