Creality Space Pi V2 Filament Dryer

The Creality Space Pi V2 Filament Dryer reliably brings your filaments back into optimum printing condition. Moisture is one of the most common causes of stringing, layer shifting, clogs and poor adhesion. The Space Pi V2 effectively removes moisture from the material and, with its upgraded heating and sensor technology, helps ensure consistently high-quality print results, even with demanding technical filaments.

High-temperature drying up to 75°C

With a maximum drying temperature of 75°C, the Space Pi V2 goes well beyond the capabilities of simple dry boxes. It is suitable not only for PLA, PETG and TPU, but also for demanding materials such as ABS, PC, ASA, PA, PP, PET and fibre-reinforced filaments such as PETG-CF, PA-CF and PLA-CF. Even highly hygroscopic materials can be dried thoroughly and reliably.

360° hot air circulation

An even airflow surrounds the entire filament spool, ensuring fast, consistent drying through every layer. No area is left untreated, so the filament dries evenly from all sides.

Advanced PTC heating with ceramic element

Inside, an advanced PTC heater with ceramic element generates a stable stream of hot air directly at the fan inlet. The air flows evenly through the drying chamber, enabling deep, thorough drying layer by layer.

Second-generation temperature and humidity sensor

The second-generation sensor responds in real time to even the smallest changes in temperature and humidity inside the chamber. Even minimal fluctuations are detected and corrected, keeping the drying conditions constant at the selected level.

Smart presets for 12 filament types

Pre-programmed drying profiles for 12 common filament types make operation especially simple: select the material, set the time and start drying.

Recommended drying temperatures at a glance:

Note: For best results, follow the drying recommendations provided by the respective filament manufacturer.

LCD touchscreen with anti-static coating

The LCD touchscreen keeps all key values clearly visible at all times: current temperature (PV), target temperature (SV), material selection, remaining time and humidity. The anti-static coating ensures a clear, stable display. The target time can be set for up to 48 hours, ideal for particularly moisture-sensitive materials.

Power-loss memory function

After a power cut, the Space Pi V2 automatically resumes the last selected drying parameters. There is no need to configure the settings again; drying simply continues from where it was interrupted.

Thoughtful details

• easy temperature display switching between °C and °F,
• heat-protected roller system for low-friction, secure spool support,
• one-touch power switch for simple and safe switching on and off directly on the device.

► Key features of the Creality Space Pi V2 Filament Dryer at a glance:

• high-temperature drying up to 75°C, also for ABS, PC, PA, PA-CF and other technical materials,
• 360° hot air circulation for fast, even drying,
• advanced PTC heating with ceramic element,
• second-generation temperature and humidity sensor for constant conditions,
• smart presets for 12 filament types,
• 48-hour timer for complete drying cycles,
• LCD touchscreen with anti-static coating,
• power-loss memory for automatically resuming drying after a power cut,
• heat-protected roller system, easy°C/°F switching, one-touch switch.

Technical specifications: