Fiberlogy Easy PETG Refill Draft, 1,75 mm / 1000 g

The Fiberlogy Easy PETG Refill filament comes without a spool and can be easily mounted on the reusable Fiberlogy spool. This helps reduce material and shipping costs, while all filament properties remain unchanged compared with the classic spooled version.

Assembly takes just a few steps: open the spool, insert the refill, close the spool and cut the securing bands. Ready to print.

Fiberlogy Draft filaments are created during internal colour change processes in production. This results in unique colour variants where the exact colour cannot be defined in advance.

Each spool may therefore vary in shade and colour combination. The material properties and print quality of Easy PETG remain unchanged. Only the colour makes each spool unique.

Fiberlogy Easy PETG combines the high strength and durability of classic PETG with significantly easier processing. The specially developed material formulation is designed to reduce typical challenges when printing with PETG, while retaining the material’s proven mechanical properties.

Compared with conventional PETG, Easy PETG shows a much lower tendency towards stringing and material build-up on the hotend. This produces cleaner print results with less post-processing required. At the same time, its high strength is retained, making the filament suitable for both functional parts and visually appealing models.

The material offers good layer adhesion, high load capacity and reliable processing on a wide range of 3D printers. Thanks to its well-balanced material properties, Easy PETG is equally suitable for technical applications, prototypes and decorative printed objects.