eufyMake Exhaust Fan Kit

The eufyMake Exhaust Fan Kit is an extraction system for E1 UV printers that vents printing odours and total volatile organic compounds (TVOCs) directly outdoors via a flexible hose. It complements the built-in filter when the side door needs to remain open while using the standard bed or Roll-to-Film Attachment, which means not all exhaust air can be captured internally.

Centrifugal fan for rapid air exchange

At the heart of the system is an approximately 1.4x oversized centrifugal fan designed specifically for use with the E1. The larger fan diameter allows a sufficient volume of air to be moved without requiring particularly high fan speeds.

Three fan speeds for different requirements

Three settings — Silent, Standard and Strong — allow the extraction performance to be adjusted to suit the printing project. With a maximum speed of 4,300 rpm, the noise level remains at up to 50 dB depending on the selected setting, making the kit suitable for workspaces where lower fan noise is preferred.

Exhaust airflow without compromising print quality

A common issue with retrofitted extraction systems is that excessive airflow can disturb freshly applied ink and negatively affect the print result. The airflow path and pressure characteristics of the Exhaust Fan Kit are matched to the E1, allowing fumes to be extracted without visibly interfering with the printing process.

Flexible installation on a worktop or wall

The kit can either be positioned on the work surface next to the printer or mounted on a wall. The supplied flexible exhaust hoses are available in 1 m and 3 m lengths, allowing the exhaust to be routed to a nearby window or wall opening without having to rearrange the entire workspace.

Included:

• 1 x exhaust fan
• 1 x exhaust duct
• 1 x exhaust duct cover
• 1 x exhaust hose, 1 m
• 1 x exhaust hose, 3 m
• 1 x power adapter
• 1 x wall-mounting kit

Technical specifications: