eufyMake Filter for Purifier P1

The Replacement Filter for Purifier P1 by eufyMake is an original spare part for the eufyMake Purifier P1, an air purifier designed for UV printing with the eufyMake E1. It contains 2.4 kg of high-density, modified activated carbon formulated to capture the fumes and VOCs released during UV printing and curing, and helps the Purifier P1 to deliver full purification performance.

Tailored to UV ink chemistry

Unlike generic HEPA filters designed to capture dust and other particles, this filter specifically targets the chemical components of UV inks. Its multilayer design combines a pre-filter layer with six activated carbon layers, providing a contact area of 8.4 m² to effectively capture gases and fumes.

Effective purification performance

With this filter, the Purifier P1 achieves a TVOC reduction of 99.54% and a PM2.5 reduction of 99.99%. This makes it an effective addition to the E1's integrated filtration system for frequent printing.

Filter life varies by operating mode

Filter life depends on the selected operating mode: approximately 300 hours in Strong mode, around 540 hours in Standard mode and up to 1,700 hours in Silent mode. Based on roughly two hours of daily use across all three modes, this equates to a filter life of up to approximately nine months.

Monitor filter life in the app

The Purifier P1 continuously monitors the filter's remaining life and displays it as a percentage in the eufyMake app. This makes it easy to order a replacement before purification performance noticeably declines. Once the filter reaches the end of its rated service life, Auto mode is no longer available. The other modes can still be used manually until a new filter is installed.

Technical specifications: